Standard catalogue motor brand "Plexmotion" Desired function, in desired quantities and exactly when desired...

Products Introduction

Plexmotion Home > Product introduction Top > CSA-UA series > CSA-UA56D1D-SH

Products Information

CSA-UA56D1D-SH

Size [mm]Model namePermissible Torque [mN-m]Gear ratioPermissible speed [rpm]Drawing download
PDFDXFIGS
60 CSA-UA56D1D-SH 4.00 1:100 0 - 18

*Please refer the attention before starting download service
(2D data and 3 data are compressed by zip format)


Packaged contents (Standard)

  1. Compact microstep driver : PDSA-UA
  2. Motor unit : PMSA-U56D1D-SH
  3. Driver to motor cable (60cm)
  4. Signal cable (60cm)
  5. Power supply cable (60cm)
  6. Operation manual

Compact microstep driver : PDSA-UA

[ Driver dimmensions | Driver specifications ]

Driver dimmensions

outline

Driver specifications

Power supply voltageDC24V+/-10%
Current consumption3A Max
Driving method2 phase unipolar chopper drive
Output current2.73A / phase Max (Peak current)
(0 / 0.35 / 0.62 / 0.90 / 1.10 / 1.32 / 1.51 / 1.69 / 1.95 / 2.09 / 2.21 / 2.34 / 2.43 / 2.54 / 2.63 / 2.73 16 steps setting)
Maximum input frequency50kHz
Microstep divisionStep divisions. Bracket( ) shows step angle at 1.8 deg / step motor.
1(1.8 deg), 2(0.9 deg), 4(0.45 deg), 8(0.225 deg), 16(0.1125 deg)
*Selectable pulse both edges setting
Input signal1)Pulse signal
2)Motor enable
3)Step division enable
4)Auto power down enable
(100ms after pulse signal input stopped)
*Input voltage DC 5 to 30V, Photocoupler input (Input resistor 330 ohms), Photocoupler current 10mA or less
Output signalExcitation timing signal : every 7.2 deg motor rotation
*Output voltage DC 5 to 30V, Photocoupler opening collector (Input resistor 100 ohms), Sink current 10mA or less
Function setting1)Step division setting
2)Pulse input mode setting (1 pulse mode / 2 pulse mode)
3)Motor holding current setting (0 / 0.35 / 0.62 / 0.90 / 1.10 / 1.32 / 1.51 / 1.69 / 1.95 / 2.09A 10 steps setting)
Indicating items1)Power condition LED indicator (Green)
2)Warning alarm LED indicator (Orange)
Protecting functions1)Current fuse: Resettable fuse
2)Excessive current protection : 4.2A Typ
3)Excessive temperature protection : IC internal temperature 144 deg C
Others1)RoHS Compliant
2)Rocking connector
Rocking connector0 to 40 Deg C No freezing
Ambient humidity85% or less No condensing
Storage temperature-10 to +50 Deg C No freezing
Storage humidity,85% or less No condensing
AtmosphereNo corrosive gas, no dust surroundings. No water and oil splash.
DimensionsW65 x D51 x H33mm
Mass0.08kg

Motor : PMSA-U56D1D-SH

[ Motor outline | Speed - Torque curve | Motor specifications ]

Motor outline

outline

Speed - Torque curve

PMSA-U56D1D-SH(2.0A) Gear ratio 1: 100

Speed - Torque curve

*mark-blueMax Starting Frequency

Motor specifications

Model NamePMSA-U56D1D-SH
Shaft typeDouble shaftsInductance1.3mH
Size60mmRotor inertia135g-cm^2
WindingUnipolarMass0.80kg
Gear ratio1:100Motor length82.0mm
Step Angle0.018degAmbient temperature-10 to +50 Deg C No freezing
Permissible torque4.00N-mAmbient humidity85% or less No condensing
Permissible speed0~18rpmStorage temperature-20 to +70 Deg C No freezing
Rated voltage2.4VStorage humidity85% or less No condensing
Rated current2.0AAtmosphereNo corrosive gas, no dust surroundings.
No water and oil splash.
Resistance1.2ohm

*The rotation direction of the motor and gearhead shaft is in reverse at the model -SE and -SF suffix.

  • Catalogue Request
  • About Plexmotion

 

Business day Calendar


- May -
SuMTuWThFSa
      1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31  

- June -
SuMTuWThFSa
            1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30            
  Holiday
 
Go to the top of this page
© Copyright Shinano Kenshi Co., Ltd. 2004